Kick Stand

From Kaypro Journal
Jump to navigation Jump to search

Somewhere between Serial Numbers 34,000 and 40,000 Kaypro began preparing to add kick stands to their machines. By about 50,000 they were regularly installing the kick stands on the machines.

A few Pre 81-003 KII machines had factory kick stands (or at least were designed to use them). Most of the 81-003 KII machines would have a factory kick stand. All of the K2, K4, K10 and K1 machines had kick stands.

(I suspect that Kaypro changed to factory kick stands on the KII about the same time that they released the K4 and K10.)

Examples

Here are three examples of the feet/kick stand arrangement:

No kick stand
Note that the foot is towards
the front and outside
Transition to a kick stand
Note the there are two screw holes
and they are moved back and in
Kickstand
Uses the same holes as the transition


Note that the kick stand, Model Number and Serial Number are all part of the same piece of sheet metal so you can't swap parts and end up with a mixed machine.

Pre-81-003

You will see from the images below that the Pre-81-003 (I sometimes refer to them as 81-001 and 81-002) KII machines also seemed to have an option to add a kick stand though I am not aware of a factory kick stand being installed on them.

#26347
No kick stand

#34126
No kick stand

#34571
No kick stand

#40448
No kick stand

#51174
No kick stand
Note this is what I call an out of sequence machine.
Even though the serial number is later
it looks like it was constructed with an older style case.
Not only does it have no kickstand it also
doesn't have the Kaypro above the NLS tag
next to the serial number.

#34644
Transition to kick stand

#56111
kick stand

81-003

#36960
No kick stand

#45618
Transition to kick stand

#58454
Kick stand

#61850
Kick stand

#62390
Kick stand

#82157
Kick stand


After Market Kick Stands

The one kick stand that looks like the factory kick stand if you don't look close is from ICP. Here is the advertisment for it and a picture of one on a machine. It is clear from the picture that it is very different from the factory kick stand.