Keyboard models: Difference between revisions
FrankRahman (talk | contribs) (→SMK) |
FrankRahman (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
Note '''KSN''' means Keyboard Serial Number | Note '''KSN''' means Keyboard Serial Number | ||
Remember that Keyboards are one of the easiest items to switch from one machine to another. Do not be too dogmatic about the serial numbers attached to a particular machine. | |||
Note about Serial Numbers near #4000 - #5000: I have found that a white thread locker was applied. If you have one of these machines only use an Anex 3980 +1 X 75 Phillips Screwdriver. If any screw appears to "Cam Out" stop immediately and hammer the Anex into the screw head before trying to remove the screw further. Other wise you will likely need to use a 1/8 inch Left Hand drill bit to remove the screw head. ''Make further notes about screw extraction.'' | Note about Serial Numbers near #4000 - #5000: I have found that a white thread locker was applied. If you have one of these machines only use an Anex 3980 +1 X 75 Phillips Screwdriver. If any screw appears to "Cam Out" stop immediately and hammer the Anex into the screw head before trying to remove the screw further. Other wise you will likely need to use a 1/8 inch Left Hand drill bit to remove the screw head. ''Make further notes about screw extraction.'' |
Revision as of 19:25, 27 October 2024
Note KSN means Keyboard Serial Number
Remember that Keyboards are one of the easiest items to switch from one machine to another. Do not be too dogmatic about the serial numbers attached to a particular machine.
Note about Serial Numbers near #4000 - #5000: I have found that a white thread locker was applied. If you have one of these machines only use an Anex 3980 +1 X 75 Phillips Screwdriver. If any screw appears to "Cam Out" stop immediately and hammer the Anex into the screw head before trying to remove the screw further. Other wise you will likely need to use a 1/8 inch Left Hand drill bit to remove the screw head. Make further notes about screw extraction.
SMK
SMK Keyboard Z (Tactile) | Found in #2775 - KSN 028401404 | |
SMK Keyboard E (Tactile) | Found in #13480 (Irregular) - KSN 058306857, #288536 - KSN 068406464 | |
![]() |
![]() |
![]() |
SMK Keyboard C (Tactile) | Found in Type A #8409 - KSN 10820673, #12275 - 11821370, #12654 - 12822711, #15453 - KSN 12823872, #16679 - KSN 12825061, #43168 - KSN 12824823 (Kaycomp Keyboard) | |
Keytronic
Keytronics Keyboard A65-02207-2O1D (Capacitive) |
Found in #3590 - KSN 05420, #4207 - KSN 50845, (8/82), #4222 - 50996 (8/82), #4223 - KSN 55080 (8/82), #7954 - KSN 44011 (10/82) | |
Type A vs Type B Keyboard
On early machines (around #8,000) There exists two types of Keyboards. In an early article they are defined as Type A and B. It turns out that this is a key indicator of who manufactured the keyboard and if it is a tactile switch or foam and foil keyboard. SMK appears to have only made the type A keyboards with tactile switches in the early days. Keytronics made the Type B keyboards with a foam and foil keyboard that degrades over time.
From the November 1983 Issue of Radio Electronics
Type A | Type B | |
External View | ||
Internal Key View | ||
Board Appearance | ||
Parts | ![]() |
Type B is a single piece |